I have a DJI Air 2S and a DJI Mini2 and I had already connected both to the smart controller because I had also done all the updates. Today I wanted to fly both drones for the first time after not using the Mini2 for a very long time.
I thought, fly around with the Mini 2 and see there is no connection to the drone. After what felt like 5 minutes of fumbling, I finally had a binding and flew a battery empty. I happily unpacked the Air 2S and switched it on. Funny, no bond. Fumbling around again and playing on the floor forever.
Now my suspicion, obviously the smart controller can only remember one binding. But I think that's crap, to put it mildly.
Is there a trick, otherwise the controller will be out of my range again.
I thought, fly around with the Mini 2 and see there is no connection to the drone. After what felt like 5 minutes of fumbling, I finally had a binding and flew a battery empty. I happily unpacked the Air 2S and switched it on. Funny, no bond. Fumbling around again and playing on the floor forever.
Now my suspicion, obviously the smart controller can only remember one binding. But I think that's crap, to put it mildly.
Is there a trick, otherwise the controller will be out of my range again.
